Output Instructions : Device Set, Reset - Mitsubishi Electric FR - F700 Programming Manual

Sequence instructions
3.25.5 Output Instructions : Device set, reset ... SET, RST
Bit devices
X
SET
D
RST
SET input
RST input
Functions
SET
(1) Turns on the specified device when the SET input turns on.
(2) The device turned on is held on if the SET input turns off. It can be turned off by
the RST instruction.
SET input
RST input
(3) When the SET input is off, the device status does not change.
RST
(1) When the RST input turns on, the specified device operates as described below.
Device
Y, M
T, C
D
(2) When the RST input is off, the device status does not change.
134
Usable Devices
Word (16-bit)
devices
Y M T
The coil and contact are turned off.
The present value is reset to 0 and the coil and contact are turned off.
Cleared to 0.
Constants
C D K H
Status
Level Digit
Designation
N
Device number
SET
to be set (turned
on)
D
Device number
RST
to be reset
Error
Flag
(M9010,
M9011)