(2) Outputs Y
(a) Outputs are designed to output the control results of a program to outside the
inverter (signal lamps, digital indicators, magnetic switches (contactors),
solenoids, etc.).
(b) An output can be exported to outside the inverter as equivalent to one N/O
contact.
(c) There are no restrictions on the number of N/O and N/C contacts of output
Yn used in the program, if they are used within the program capacity range.
No restrictions on the number of used contacts.
Sequence
function
When no external devices are connected to the control output terminals, "Y" can
be used as the internal relay "M".
Program
Fig 3.13 Concept of Outputs (Y)
Description of devices
Load
M11
Output circuit (external devices)
3
85