Mitsubishi Electric FR - F700 Programming Manual page 64

("n" indicates a value determined according to the station number setting.)
*1 Signal names are initial values. Using Pr. 180 to Pr. 186, Pr. 188, and Pr .189, you can
change input signal functions.
Signals of the RYn0, RYn1, and RYn9 can not be changed. Even when changed using Pr.
178, Pr. 179, and Pr. 187, the settings are invalid.
Refer to the Inverter Manual for details of Pr. 178 to Pr.189.
*2 Signal names are initial values. Using Pr. 190 to Pr .196, you can change output signal
functions.
Refer to the Inverter Manual for details of Pr. 190 to Pr.196.
(2) Remote register
PLC Function
Address
Device No.
D9062 RWwn
D9063 RWwn+1
D9064 RWwn+2
D9065 RWwn+3
("n" indicates a value determined according to the station number setting.)
(3) Data I/O image
Master station
REMARKS
Use the remote registers freely since they are all user areas.
Description
Registers designed
to read data received
from the master
station
Devices in CC-Link (station No. 1)
RY00 to 0F
RX00 to 0F
RWw0
RWw1
RWw2
RWw3
RWr0
RWr1
RWr2
RWr3
CC-Link I/O specifications
PLC Function
Address
Device No.
D9078 RWrn
D9079 RWrn+1
D9080 RWrn+2
D9081 RWrn+3
FR-F700 series
Devices in built-in sequence
X30 to 3F
Y30 to 3F
D9062
D9063
D9064
D9065
D9078
D9079
D9080
D9081
Automatically refreshed at every END.
Description
Registers designed to
write data to be sent
to the master station.
2
57