Jam 1 Rap - Xerox WORKCENTRE 3119 Service Manual

3 JAM 1 RAP

Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Paper is jammed in front of or inside the fuser.
Paper is jammed in the exit roller and in the fuser after passing through the feed sensor actuator.
Check and Cause
1. If paper is jammed in the exit roller, PL 3
and the fuser, PL 5 after passing through the
feed sensor actuator, PL 4, the feed sensor
actuator may be defective.
2. If paper is jammed in front of or inside the
fuser, PL 5.
WorkCentre 3119
WARNING
1. Check the feed sensor actuator, PL 4 for
damage, install a new feed sensor actuator if
necessary.
2. Install new parts as necessary:
• Exit sensor actuator, PL 4
• SMPS/HVPS, PL 1
• Main PBA., PL 1
07/06
Status Indicator RAPs
Solution
2-7