Gp 5 Tech Mode - Xerox WORKCENTRE 3119 Service Manual

General Procedures and Information

GP 5 Tech Mode

The Engine Tests Mode supplies useful functions to check the condition of the engine. It tests the
condition of each device and displays the result of the test on the LCD.
To enter the Tech Mode
To enter the Engine Test mode
Press "Menu > Copies >
Mode', the machine has entered Engine Test Mode.
• To enter a lower menu (Sub menu) press the Start/Enter key.
• To confirm selection press the Print key.
• To exit into an upper menu press the Menu/Exit key.
• To return to the user menu press the Menu/Exit key.
Tech Mode Settings Map
1st Level
Tech Mode Data Setup
Machine Test
Report
Tech mode descriptions
Data Setup
This option enables you to selectively clear information stored in your machine's memory. To ac-
cess this option, enter Tech mode and press the menu button until 'Data Setup' appears on the
display. Press the enter button and use the
ble. Press the enter button to confirm selection. Or, to return to standby mode, press Stop/Clear.
-Clear all Mem. : Clears all settings and information stored in the machine's memory accord-
ing to country.
-Total page CNT : Clears the total page printed counter.
-FLT Scan CNT : Clears the total page scanned counter.
-Used Toner CNT : Clears the total of pages printed counter:
6-32
> > Menu >
2nd Level
Clear All Mem.
Clear Count
Flash Upgrade
Switch Test
Dram Test
Rom Test
Pattern Test
Shading Test
System Data
Error Info
in sequence, and the LCD briefly displays 'Tech
Table 1:
3rd Level
Select country
Total page CNT
FLT Scan CNT
Used Toner CNT
Local
and buttons to scroll between the options availa-
06/06
Default
4th Level
WorkCentre 3119
value