Manual machining
5.4 Manual machining using cycles (functions)
5.4.3
Manual drilling centered
Functionality
The "Manual drilling centered" function is designed to produce deep-hole drill holes in the
turning center. Before you start the cycle, you must position the tool in such a way that it can
approach the programmed Z initial position without risk of collision. The function itself will
position the tool on the center of rotation.
Operating sequences
You can access the drilling cycle overview by pressing the softkey "Drilling" in the basic
screen for "Manual Machine Plus".
Figure 5-22
60
Drilling cycle overview - "Center drilling" selected
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning