5. If machining was terminated (e.g. "Machining completed"), then the execution screen can
See also
Messages (Page 123)
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Note
Press the <NC-Stop> key if you want to interrupt the machining operation. The selected
direction of the spindle rotation continues to be activated.
By pressing the key <NC stop>, the operating mode JOG is automatically changed, i.e.
you can traverse the axes manually. By continuing the execution with <NC start>, the
interruption point is approached again and execution of the program is continued.
be exited using the "Cancel" softkey.
5.4 Manual machining using cycles (functions)
Manual machining
57