2. Traverse to a position that is to be taught-in and press "Save block".
3. You can save the position with path feed.
4. You can save the position with rapid traverse.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Figure 6-12
"Save block" menu
After the control acknowledged the action with a screen message (e.g.: "The block was
inserted as N20"), a new position could be traversed to and this in turn taught-in using
"Save block".
Figure 6-13
Closing "Teach In"
Machining the machining step program manually
6.2 Teach In
115