Executing The Machining Step Program - Siemens SINUMERIK 802D sl Programming And Operating Manual

Machining the machining step program manually

6.4 Executing the machining step program

6.4 Executing the machining step program
Functionality
Figure 6-19
In the "Machining step program" function, you can toggle between the horizontal softkey
functions "Execute" and "Exec. here" using the <ETC> key.
The two functions change from the "Machining step program" into that screen form in which
the actual machining step program is to be executed:
The complete machining step program is executed with "Execute".
With "Exec. here", the program is executed from the actual cursor position in the machining
step program (step that is marked in the program).
Figure 6-20
120
Machining step program
Execute the machining step program
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning