Roughing Cycle B - Siemens SINUMERIK 802D sl Programming And Operating Manual

Manual machining
5.4 Manual machining using cycles (functions)
5.4.7.2

Roughing cycle B

Functionality
The function "Roughing B" is used to produce a simple cutting contour, with an additional
interpolation point allowing beveled or tapered contours. Transitions to adjacent faces can
again be worked as a radius or chamfer.
Operating sequences
You can access the turning cycle overview by pressing the softkey "Turning" in the basic
screen for "Manual Machine Plus".
In the softkey menu "Turning", press the softkey "Roughing cycle B".
Alternatively, you can select "Roughing cycle B" from the turning cycle overview with
<Cursor keys> and activate with the input key.
Figure 5-48
88
Roughing cycle B, position "Outside right"
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning