Siemens SINUMERIK 802D sl Programming And Operating Manual page 37

Notice: When constant cutting rate (G96) is selected, the maximum permissible spindle
speed, corresponding to the fitted tool chucking device must be entered in the input field
MR (spindle speed limitation)!
Failure to pay sufficient attention to this point can lead to serious damage as a result of the
chucking device speed being exceeded.
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
5.2 Display and operator control optios in the main screen for "Manual Machine Plus"
DANGER
Manual machining
37