Manual Machining With Machining Types; Axis-Parallel Traversal - Siemens SINUMERIK 802D sl Programming And Operating Manual

5.3

Manual machining with machining types

5.3.1

Axis-parallel traversal

Functionality
The axis-parallel traversal is used for the simple cutting on the workpiece or for positioning
the axes.
If you move the axis direction switch, the control then moves the X and Z axes accordingly.
Operating sequences
1. You can access the "Parallel traversing of axes" function via the main screen "Manual
2. If a different machining mode is active, press the "Machining mode" softkey until "Parallel
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Machine Plus".
traversing of axes" is displayed.
Figure 5-11 Main screen for "Manual Machine Plus"
5.3 Manual machining with machining types
Manual machining
47