Siemens SINUMERIK 802D sl Programming And Operating Manual page 51

Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
DANGER
Notice: Omitting or using the wrong sign for the input values or entering the wrong arc
direction can lead to a collision and may destroy the tool or the workpiece.
Note
Any limit stops that are activated should be disabled before starting radius turning or set
to a value outside the traversing range needed for radius turning. Otherwise an error
message is transmitted by the controller which prevents the "Manual radius turning"
function being started.
5.3 Manual machining with machining types
Manual machining
51