Displays a dialog used to open an existing machining step program or create a new
machining step program.
If the file is not located in drive N (NC storage), ensure that the external medium is not
removed during the machining.
A save dialog appears.
Returns to the menu for the machining step program
Figure 6-4
This function inserts a positioning block at the current machine axis position in the selected
machining step.
This function deletes the currently selected machining step.
To interrupt the function "Machining step program" press "Cancel".
This softkey returns you to the main screen for "Manual Machine Plus".
If you have changed any values, a prompt window informs you accordingly.
Press "OK" to save the values
Press "Cancel" to discard the settings.
The machining step program is saved.
This softkey returns you to the main screen for "Manual Machine Plus".
Inserting a tool change into the program.
Change into the dialog box for tool change (Page 111).
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Machining step program
Machining the machining step program manually
5.4 Manual machining using cycles (functions)
109