Toggling The Display - Siemens SINUMERIK 802D sl Programming And Operating Manual

Manual machining
5.2 Display and operator control optios in the main screen for "Manual Machine Plus"
5.2.1

Toggling the display

Functionality
In the position display screen you can edit the displayed values using the vertical softkeys.
Figure 5-4
Softkeys
Change the display to "relative position display" and "reset" the display in the X axis.
Change the display to "relative position display" and "reset" the display in the Z axis.
Toggle the display between "absolute position display" and "relative position display" in the X
axis.
Toggle the display between "absolute position display" and "relative position display" in the Z
axis.
Switching between the following operating modes:
● Traversing the axes parallel to the axis
● Taper turning
● Radius turning
The parameters for the machining type are displayed in the main screen of the "Manual
Machine Plus".
The current actual position of the relevant axis is transferred to the selected input field (-X/-
Z/+X/+Z).
38
Main screen for "Manual Machine Plus"
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning