Siemens SINUMERIK 802D sl Programming And Operating Manual page 18

Turning On, Reference Point Approach
3.1 Entry to the "Manual Machine Plus" operating area
3. You can access the "Manual Machine Plus" area by clicking on softkey "Manual":
Note
If you have not yet executed a reference point approach, the JOG REF operating mode
will be reselected automatically when you press the "Manual" softkey.
4. The operating area "Manual Machine Plus" can be exited with the "CNC" softkey, after
Note
The manual machine cannot be exited in the "Execute cycles" and "Execution window"
screen forms of the stepping program.
General operating information
If a screen (e.g. for the "thread tapping" function) contains input fields, then you can edit
them as follows:
● Select the input fields using the <cursor keys>.
● Enter data using the <numeric keys>.
● Accept the data using the <INPUT key>.
● Use the <Tab key> to switch between the input fields and the selection box during the
● If you do not want to accept an input value,then exist the corresponding field using
Note
The pictures in the parameterization screenforms depend on the setting of the machine data
by the machine manufacturer, i.e. display of the tool position before or behind the center of
rotation with regards to the turret head.
18
Figure 3-2 Reference point approach
which the operating area of the NC basic machine is active again.
opening and saving of files.
<Cursor key> or change the screen form. Do not press the <INPUT> key.
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
Manual Machine Plus Turning