Fuji Xerox DocuCentre-IV C2260 User Manual page 41

No. Component
9 Locking casters
10 Tray 5
11 Stylus pen holder
12 Stylus pen
Left side and rear views of the machine
No. Component
1 Top left cover E
2 Top left cover A
3 Top left cover D
4 Bottom left cover B
5 Bottom left cover C
6 Adjusting foot
7 RESET button
8 USB 2.0 interface
connector
Used for locking the wheels of the machine. Lock these casters after
moving the machine to its installation site.
Used for loading non-standard paper, such as postcards, that cannot be
loaded in Trays 1 to 4.
Stores the stylus pen.
Used for touching the touch screen on the control panel to configure
settings.
Note • You can directly touch the touch screen not only with the stylus pen
but also with a finger.
8
9
10
11
12
7
Open this cover to clear paper jams.
Open this cover by lifting up the release lever to clear paper jams.
Open this cover by lifting up the release lever to clear paper jams.
Open this cover to clear paper jams.
Open this cover to clear paper jams.
Prevents the machine from toppling over. Move the machine to its
installation site and then rotate this adjuster in clockwise direction until it
touches a floor.
Automatically switches the machine off when a current leakage is
detected.
Connects a USB cable for a maintenance port.
Machine Components
Function
1
2
3
4
5
6
Function
2
39