Delayed Print - Fuji Xerox DocuCentre-IV C2260 User Manual

10 Job Status
Yes
Starts printing the job. After printing, the job is deleted.
Note
No
Cancels printing the job.

Delayed Print

This feature allows you to temporarily store print data on the machine to print it at
specified time.
Up to 100 jobs can be stored (queued) simultaneously for the Delayed Print feature. If
the power is switched off when jobs are in queue (before the specified print time), the
jobs whose print time has elapsed will automatically be printed immediately after the
power is switched on again.
This following describes how to print or delete jobs stored with the Delayed Print
feature.
For information on how to operate a Delayed Print job, refer to the print driver's help.
Note
1
Select [Delayed Print].
2
Select the job to be printed or deleted.
Note
10
3
Select any option.
Delete
Deletes the Delayed Print job.
Refer to "When [Delete] is Selected" (P.351).
Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the
job will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.351).
350
• After a sample set is output, the remaining sets will automatically be output if the machine is
not instructed for the period specified in [Auto Job Release]. To prevent the remaining sets
from being output automatically, set [Auto Job Release] to [Off]. For information on how to
set [Auto Job Release], refer to "5 Tools" > "Common Service Settings" > "Machine Clock/
Timers" > "Auto Job Release" in the Administrator Guide.
• When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Delayed
Print] under [Secure Print Jobs & More] even if you select [Delayed Print] on the print driver.
For more information, refer to "5 Tools" > "Authentication/Security Settings" >
"Authentication" > "Charge/Private Print Settings" in the Administrator Guide.
• Select [Refresh] to display the updated
information.
• Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• [Print Time] shows the time to start
printing.