Calling A Stored Program - Fuji Xerox DocuCentre-IV C2260 User Manual

Calling a Stored Program

The following describes how to call a stored program.
When you call a specified stored program, the last screen shown when you registered
the stored program appears.
1
Press the <Services Home> button.
2
Select [Stored Programming].
3
Select a number of a stored program
containing the features you want to use.
Note • You can only select registered numbers.
• Select [
• After the stored program has been called,
For information on how to change the volume of the sound that notifies that a stored program has been
called, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming
Complete Tone" in the Administrator Guide.
4
After the stored program is called, select other features if necessary.
5
Press the <Start> button.
] to return to the previous
screen or [ ] to move to the next screen.
the machine sounds an audible tone. If a
failure occurs, the machine sounds a fault
tone.
Calling a Stored Program
<Services Home> button
1 2 3
4 5 6
7 8 9
0 #
C
<Start> button
8
325