Fuji Xerox DocuCentre-IV C2260 User Manual page 245

To verify the validity of a certificate, prior settings are required. For information on the settings, refer to
"5 Tools" > "Connectivity & Network Setup" > "Security Settings" > "Certificate Revocation Retrieval
Settings" in the Administrator Guide.
1
Select [Address Book].
2
From the drop-down menu on the [Network
E-mail Address Book] screen, select [List all
public entries], [Search Public], or [Search
Network] to search for recipients.
3
Select a recipient from the address list, and
then select [To], [Cc], or [Bcc].
Note • When specifying multiple recipients,
specify them continuously.
Important • When specifying an e-mail address,
check if the address contains a domain
that is not permitted for use. In this case,
the address cannot be used.
List all public entries
Displays the local address list.
Refer to "When [List all public entries] is Selected" (P.244).
Search Public
Searches recipients in the local address list.
Refer to "When [Search Public] or [Search Network] is Selected" (P.244).
Search Network
Searches recipients in the remote address list.
Note • To display [Search Network], the prior setting is required in the System Administration mode.
Refer to "When [Search Public] or [Search Network] is Selected" (P.244).
Name/E-mail Address
Lists names and their e-mail addresses.
To
Sets the selected address as a recipient.
Cc
Sets the selected address as Cc.
Bcc
Sets the selected address as Bcc.
E-mail
5
243