Folding (Outputting Bi-Folded); Preset Repeat Image (Making Multiple Copies On A Single Sheet) - Fuji Xerox DocuCentre-IV C2260 User Manual

3 Copy

Folding (Outputting Bi-Folded)

This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all
Note
1
Select [Folding].
2
Select any option.
3
Off
Does not fold copies.
Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is
installed.
Creases copies in half.

Preset Repeat Image (Making Multiple Copies on a Single Sheet)

This feature allows you to repeatedly copy one original onto equally divided areas
according to the specified number of copies.
Note
1
Select [Preset Repeat Image].
132
the output copies have been delivered.
• The supported paper orientation is only
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• When you select an option other than [Auto %] in [Reduce/Enlarge], image loss may occur
depending on the image size of the document.
. Select the tray whose orientation is set to .