Image Shift (Adjusting The Image Position) - Fuji Xerox DocuCentre-IV C2260 User Manual

3 Copy
Top & Bottom (Top/Bottom)
Erases the shadows of top and bottom edges of the document according to the
orientation of the loaded document. You can specify the edge width you want to
erase in the range from 0 to 50 mm in 1 mm increments.
Left & Right (Left/Right)
Erases the shadows of left and right edges of the document according to the
orientation of the loaded document. You can specify the edge width you want to
erase in the range from 0 to 50 mm in 1 mm increments.
Center
Erases the shadow in the center of facing pages of a bound document or a booklet.
You can set the binding erase width in the range from 0 to 50 mm in 1mm increments.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note
3
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder. Always select [Sideways Images] when the
top of the document is placed facing the left side (horizontal text).
2 Sided Original - Side 2
You can select this option when [Individual Edges] is selected. Set whether the same
value is set to the edge erase amount of Side 1 and Side 2.
Same as Side 1
The same value is set to the edge erase amount of Side 1 and Side 2.
Mirror Side 1
The edge erase amounts of Side 1 and Side 2 are set symmetrically.

Image Shift (Adjusting the Image Position)

This feature allows you to shift the position of document images so that the images are
placed on the left, right, top, bottom, or center of paper. You can also adjust the
amounts of the left, right, top, and bottom margins. If you make 2-sided copies, you can
adjust the image positions for Side 1 and Side 2 individually.
Note
108
• If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
• The image shift amount is set in accordance with the paper, and does not affect the setting
made in [Reduce/Enlarge].