Fuel Tank - APRILIA SL 750 SHIVER Service Station Manual

Bodywork
•
Disconnect the two connectors.
•
Remove the filter casing together with
the throttle body, by lifting it up from
behind.
CAUTION
COVER THE COUPLING OPENINGS SO THAT
NO FOREIGN BODIES COME IN.
Should the throttle body be removed, disconnect either the map sensor pipes or the inlet ducts; it is
necessary to check the air system tightness. Using Axone, check the following parameters:
a - take the vehicle temperature to 90 °C (194 °F) or above.
b - front cylinder throttle valve correction between - 60 and 60.
b - rear cylinder throttle valve correction between - 60 and 60.
c - potentiometer 1 front throttle valve value is 0.5 or above.
d - potentiometer 1 rear throttle valve value is 0.5 or above.
e - the difference of throttle valve correction values between the front and rear cylinders should not
exceed 0.6.
See also
Air filter

Fuel tank

•
Remove the saddle.
•
Remove the side fairings.
BODYW - 10
SL 750 SHIVER