Suspensions
•
Working from the left side, unscrew
and remove the five nuts and remove
the crown and the bolts.
•
Undo and remove the five screws and
remove the anti-vibration buffer holder.
•
Check the anti-vibration buffers ac-
cording to the routine maintenance ta-
ble.
See also
Adjusting
Checking the rear wheel
CHECK THAT ALL THE PARTS ARE IN GOOD CONDITIONS, ESPECIALLY THOSE MENTIONED
BELOW.
REAR WHEEL BEARINGS
Carry out the check with the bearings fitted on the wheel.
ROTATION CHECK
•
Manually rotate the inside ring of each bearing. Rotation must be constant, smooth and
noiseless.
If one or both bearings do not fall within the control parameters:
SUSP - 24
SL 750 SHIVER