APRILIA SL 750 SHIVER Service Station Manual page 66

Electrical system
TABLE F - INSTRUMENT PANEL CABLES
1. The two medium clamps shall be positioned
so that they match the corresponding sec-
tions of chassis indicated through two turns
of red belt.
2. Place the clamp as close as possible to the
chassis vertical tube.
TABLE G - AIR TEMPERATURE CONNECTOR
AND FRONT HEADLAMP CABLE
•
Use a small clamp to fasten the air
temperature connector and the front
headlamp cable to the main cable har-
ness.
TABLE H - COIL CABLE
•
Fasten the coil cable with a small
clamp.
TABLE I - HOUSING AND CENTRAL CABLE GUIDE
1. The housing containing light switch and key connectors shall be placed freely over the branch
with the clamp and not fixed.
2. Place medium clamps on the central cable guide that holds only the branch that leads to the filter
casing left side.
ELE SYS - 8
SL 750 SHIVER