APRILIA SL 750 SHIVER Service Station Manual page 43

SL 750 SHIVER
•
Lift the tank.
•
Undo and remove the rear coil fixing
screw.
•
Slide off the rear coil.
•
Unscrew and slide off the rear spark
plug.
•
Check the gap between the electrodes
with a feeler thickness gauge.
CAUTION
DO NOT ATTEMPT TO READJUST THE ELEC-
TRODE GAP.
The gap between the electrodes should be be-
tween 0.7 ÷ 0.8 mm (0.027 ÷ 0.031 in). Otherwise,
replace the spark plug (2).
•
Make sure the washer is in good con-
ditions.
Installation:
•
Once the washer is fitted, screw the
spark plug (2) carefully to avoid dam-
aging the thread.
•
Tighten using the spanner supplied in
the tool kit. Make each spark plug (2)
Maintenance
MAIN - 7