SL 750 SHIVER
•
Place the speed sensor with caution.
•
Tighten the speed sensor fixing screw.
•
Place the transmission control rod with
the washer.
•
Remove the grease off the primary pin-
ion tapered pins - crankshaft coupling
surfaces .
•
Position the crankshaft gear.
•
Position the washer and the crankshaft
lock-nut.
•
Fit the special tool and fix it steadfastly
to the crankcase by tightening the four
fixing screws on the crankcase.
•
Tighten the crankshaft gear lock-nut.
Specific tooling
020711Y Engine pinion locking
Engine
ENG - 69