SL 750 SHIVER
•
Place the appropriate tool for locking
the flywheel.
•
Locking the flywheel in position, using
the specific tool, tighten the screw on
the crankshaft.
•
Remove the special tool.
Specific tooling
020713Y Flywheel extractor
Locking torques (N*m)
Screw fixing Rotor - Crankshaft - M12x1.25 (1)
120 Nm (88.51 lbf ft)
•
Place the retention plate.
•
Tighten the screw.
Clutch side
•
Remove the water pump cover.
•
Undo and remove the eleven screws
working in a diagonal sequence.
•
Collect the gasket.
Engine
ENG - 13