APRILIA SL 750 SHIVER Service Station Manual page 174

Engine
9. Stud bolt
10.Water pipe fitting
11.TBEI screw
12.Joint
13.O-ring
14.Flanged nut M8X1.25
15.Flanged nut
16.Valve sealing ring
17.TE flanged screw
18.Lock nut M10x1.25
19.Water Temperature Sensor
20.Threaded cap M6X10
21.Threaded cap
22.TE flanged screw
23.To radiator
Removing the overhead camshaft
•
Remove the clutch side crankcase
half.
•
Rotate the crankshaft until the rear cyl-
inder reaches the TDC.
First remove the rear head cover in order to re-
move the rear head camshafts.
First remove the front head cover in order to re-
move the front head camshafts.
Mark the head camshafts, the corresponding
sprocket wheels and cam caps in order not to in-
terchange them upon refitting.
•
Undo and remove the eight cam cap
screws working in a diagonal se-
quence and in stages.
ENG - 26
SL 750 SHIVER