APRILIA SL 750 SHIVER Service Station Manual page 130

Electrical system
not, it means that, with key set to ON, there is no 5V voltage at PIN 2: restore the cable harness whose
pink/white cable will be short circuit to ground
Air temperature sensor - instrument panel
INSTRUMENT PANEL AIR TEMPERATURE
SENSOR
Function
It tells the ambient air temperature to the instru-
ment panel.
Operation / Operating principle
NTC type sensor (resistance sensor, inversely
variable with temperature).
Level in wiring diagram:Temperature sensors
Location:
•
on the vehicle: on the plastic protection
under the instrument panel
•
connector: under the instrument panel
Electrical characteristics:
•
Resistance at 0°C: 32.5 kOhm +/- 5%
•
Resistance at 25°C: 10.0 kOhm +/- 5%
Pin-out:
1. Voltage 5V
2. Ground connection
AXONE: ELECTRICAL ERRORS
INSTRUMENT PANEL DSB 06
Error cause
•
The oil sensor failure is signalled when it is detected that the sensor circuit is open or short
circuit to positive.
Troubleshooting
•
Check the sensor connector and the instrument panel connector (PINS 10 and 30): If not
OK, restore; if OK, check the continuity of the pink cable between the sensor connector and
the instrument panel connector PIN 10: if not OK, restore the cable harness; if OK, check
the correct sensor resistance: if not OK, replace the sensor; if it is OK, check the continuity
of the yellow/black cable between the sensor connector and the instrument panel connector
PIN 30: If not OK, restore the cable harness; if OK, with key set to ON, check if there is
voltage at the sensor connector PIN 1: if there is no voltage, replace the instrument panel;
if there is approximately 12V, restore the cable harness (there is a short circuit in the battery).
ELE SYS - 72
SL 750 SHIVER