APRILIA SL 750 SHIVER Service Station Manual page 195

SL 750 SHIVER
•
Screw the screw located outside the
cylinder.
•
Tighten the three screws on the intake
and discharge sides.
•
Screw the two head fixing screws lo-
cated inside the timing chain compart-
ment.
•
Check that the intermediate gear pin
lubrication holes are clean.
•
With a hook, hold the timing chain.
•
Fit the timing chain on the intermediate
gear.
•
Slide in the pin together with a new O-
Ring and a washer.
Engine
ENG - 47