Engine
•
Unscrew and remove the four nuts,
working in a diagonal sequence and in
stages.
•
Slide off the head-cylinder unit from the
stud bolts.
•
Remove the three fixing screws of the
cylinder head to the discharge and in-
take sides.
•
Remove the gasket between the cylin-
der and the crankcase.
See also
Chain removal
Disassembling the piston
•
Remove the head and cylinder.
•
Take out the pin locking ring.
•
Lock the connecting rod using the spe-
cific tool.
•
Slide off the pin and remove the piston.
Specific tooling
020716Y Connecting rod locking
ENG - 40
SL 750 SHIVER