APRILIA SL 750 SHIVER Service Station Manual page 74

Electrical system
TABLE M4 - FILTER HOUSING
•
Insert the throttle body, with the cable
harness correctly fixed, in the filter cas-
ing.
TABLE N - GROUND LEAD AND START-UP CABLE
•
Fit the ground lead following the path drawn in figure that will not be visible on the vehicle
once fully assembled.
•
As indicated above, the ground lead is laid behind the filter casing pipe.
•
As regards the lower section, the cable is laid behind the starter motor plate.
•
In the central position, insert a small clamp joining the ground lead and the oil cable to the
smallest pipe.
ELE SYS - 16
SL 750 SHIVER