APRILIA SL 750 SHIVER Service Station Manual page 260

Chassis
•
With the specific box-spanner, un-
screw and remove the locking ring nut.
•
Working from the left side, unscrew
and remove the nut and collect the
washer.
REMOVAL SHOULD BE CARRIED OUT WITH
UTMOST CAUTION.
SUPPORT THE SWINGARM FROM THE FRONT
TO AVOID ACCIDENTAL FALLS.
PLACE A WOODEN SUPPORT UNDER THE
FRONT PART OF THE REAR SWINGARM TO
PREVENT IT FROM LOWERING AND TO KEEP
IT UPRIGHT.
•
Working on the right side, unscrew and
remove the swingarm bolt.
UPON REMOVING THE REAR SWINGARM PAY
ATTENTION NOT TO JAM THE GEARING
CHAIN.
See also
Removing the rear wheel
CHAS - 4
SL 750 SHIVER