Electrical system
ONCE THE ELECTRICAL SYSTEM IS REFITTED, THE CONNECTORS RECONNECTED AND
CLAMPS AND RETAINERS RESTORED, CARRY OUT THE CHECKS INDICATED UNDER "SPE-
CIAL CHECKS FOR THE CORRECT CONNECTION AND LAYING OF CABLES" IN THE "ELEC-
TRICAL SYSTEM INSTALLATION" SECTION.
TABLE A - CONTROL UNIT, MAIN CABLE HARNESS, HORN AND NEUTRAL SENSOR CABLES
1. ECU
2. Engine Connector
3. Vehicle Connector
4. ECU ground connection
5. Horn and neutral sensor cables
6. Main cable harness
The horn and neutral sensor cables shall be laid over the water pipe upon installation.
TABLE B - UNDER SEAT CABLE HARNESS
1. Use small clamps to fasten the cables.
2. Use medium clamps to fasten the main cable harness.
ELE SYS - 10
SL 750 SHIVER