Programming Basic Instructions; Parameter Structure - WEG CFW-11 Programming Manual

5.1 PARAMETER STRUCTURE

When the right "soft key" in the monitoring mode ("Menu") is pressed, the first 4 parameter groups are showed
on the display. An example of the parameter group structure is presented in the table 5.1. The number and the
name of the groups may change depending on the used software version.
NOTE!
The inverter leaves the factory with the keypad (HMI) language, frequency (V/f 50/60 Hz mode) and
voltage adjusted according to the market.
The reset to the factory default may change the content of the parameters related to the frequency
(50 Hz/60 Hz). In the detailed description, some parameters present values in parentheses, which
must be adjusted in the inverter for using the 50 Hz frequency.
Level 0
Monitoring 00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
04 BASIC APPLICATION
05 SELF-TUNING
06 BACKUP PARAMETERS
07 I/O CONFIGURATION
08 FAULT HISTORY
09 READ ONLY PARAMS.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

PROGRAMMING BASIC INSTRUCTIONS

Table 5.1 - CFW-11 parameter groups structure
Level 1
20 Ramps
21 Speed References
22 Speed Limits
23 V/f Control
24 Adjust. V/f Curve
25 VVW Control
26 V/f Current Limit.
27 V/f DC Volt.Limit.
28 Dynamic Braking
29 Vector Control
30 HMI
31 Local Command
32 Remote Command
33 3-Wire Command
34 FWD/REV Run Comm.
35 Zero Speed Logic
36 Multispeed
37 Electr. Potentiom.
38 Analog Inputs
39 Analog Outputs
40 Digital Inputs
41 Digital Outputs
42 Inverter Data
43 Motor Data
44 FlyStart/RideThru
45 Protections
46 PID Regulator
47 DC Braking
48 Skip Speed
49 Communication
50 SoftPLC
51 PLC
52 Trace Function
38 Analog Inputs
39 Analog Outputs
40 Digital Inputs
41 Digital Outputs
Programming Basic Instructions
Level 2
90 Speed Regulator
91 Current Regulator
92 Flux Regulator
93 I/F Control
94 Self-Tuning
95 Torque Curr.Limit.
96 DC Link Regulator
110 Local/Rem Config.
111 Status/Commands
112 CANopen/DeviceNet
113 Serial RS232/485
114 Anybus
115 Profibus DP
Level 3
5
5-1