10.3 Cleaning The Mail Path; How To Clean The Brushes And Sponge (Sealer) - Neopost IS-440 User Manual

Cleaning the Mail Path

10.3 Cleaning the Mail Path

Cleaning the mail path includes:
Cleaning sealer/moistener brushes and sponge (if installed)
•
Cleaning feeder belts and rollers
•
Cleaning the Mailing System sensors on the mail path.
•
Cleaning Brushes and Sponge of the Sealer

How to Clean the Brushes and Sponge (Sealer)

How to Clean
the Brushes and
Sponge (Sealer)
MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM
POWER SOURCE BEFORE CLEANING!
To clean the brushes and sponge of the feeder:
1
Open the feeder and push the left of the upper blue release
lever to raise the upper drive assembly.
2
Pull up the brush release lever.
10
197