Privileged Access - Sagem PHONEFAX 320 User Manual

7. PRIVILEGED ACCESS

PRIVILEGED ACCESS CALLS
If you do not want to be disturbed by anyone except privileged access callers (with a special access code), set the
unit to TAD receive mode and input a privileged access code:
‡
Press FUNCTION, 4, 6 and
‡
Input an access code other than 0000 and press
Note: you must activate the privileged access facility using FUNCTION 47 (setting: WITH).
INCOMING CALLS
To call you, your privileged callers (knowing your privileged access code) will proceed as follows:
‡
Dial your number.
‡
Wait for your terminal to answer the call.
‡
Press the * key, then enter the 4-digit privileged access code.
Notes: if you do not answer the call, the caller will be prompted to leave a message on your TAD.
The "remote message retrieval" and "privileged access" codes must be different. To de-activate the
privileged access facility, simply set the code to 0000.
.
to confirm.
15