Use - Sagem PHONEFAX 320 User Manual

4. USE

When the unit is powered up for the first time, you will be prompted to set the date and time. Having entered the
date and time, you may use all your unit's basic functions. You may program your "first setups" before sending
a fax.
FUNCTIONS ACCESS
The following keys are used to program your unit:
- FUNCTION
key
ou
- START key:
- STOP key:
- > key:
- < key:
- C key:
There are 2 ways to access functions:
• by invoking the appropriate function directly, e.g.:
(print out the listing of function codes press FUNCTION, 5, 1,
• by scrolling through the unit's menus using the V, > and <.. keys, e.g.:
FIRST SETUPS
ENTERING OR CHANGING THE DATE AND TIME
‡
Press FUNCTION, 2, 1 and
‡
Enter the date and time using the numerical keypad, then press
For example, to enter 7 May 1999, 9:15, enter 0 7 0 5 9 9 0 9 1 5 then press
STORING YOUR CSID
This is the number of the telephone line to which your unit is connected. This number will be printed on the
header of the faxes you send.
‡
Press FUNCTION, 2, 2 and
‡
Enter your CSID using the numerical keypad, then press
Notes: to erase the last character entered, press the < key.
You can insert spaces to make the number more legible, using the > key.
To insert a "+" sign, press the "*" key.
2
enables you to enter FUNCTION mode or to confirm an entry
or option.
used to confirm an entry or option
enables you to exit the FUNCTION mode. Any changes which
were not confirmed will be discarded.
enables you to move to the next option or to shift the cursor
right in an input field.
enables you to return to the previous option or to shift the
cursor left in an input field.
enables you to exit a function or go back up one level in the
menu structure.
<
.
.
)
<
(3 times)
to confirm.
to confirm.
Stop
<
<
.