Messages Ogm; Call Screening - Sagem PHONEFAX 320 User Manual

ANSWER-ONLY ANNOUNCEMENT LISTENING
‡
Press FUNCTION, 4, 2 and
Note: to listen to the announcement of the currently selected TAD mode, you can also press the OGM key.
To erase the announcement of the currently selected TAD mode, press ERASE then OGM.

3. MESSAGES OGM

PRESENCE OF MESSAGES
The status of the PLAY indicator tells you of the presence of messages:
- "PLAY" indicator off: no messages.
- "PLAY" indicator flashing: at least one message not listened to.
- "PLAY" indicator lit: presence of messages. All the messages have been listened to.
Note: the number of messages is indicated on the screen.
LISTENING TO MESSAGES
‡
Press the PLAY key.
The unit will display, while each message plays, its sequential number and the date and time when it was
received.
During message playback:
- Press the to go on to the next message,
- Press the to return to the beginning of the current message.
- Press the twice to go back to the previous message.
- Press the PLAY key to pause playback; press PLAY again to resume playback
- Press the ERASE key to erase the message being listened to,
- Press the + and - to increase or decrease the volume during playback.
ERASING MESSAGES
ERASING ALL MESSAGES
‡
After playback, press ERASE then PLAY.
ERASING A MESSAGE
‡
During playback, press ERASE. The system skips to the next message, if any.

4. CALL SCREENING

The call screening facility enables you to listen to a voice message while it is being recorded:
- you may answer the call by picking up the receiver,
- you may set the loudspeaker volume using the + and - keys.
To select call screening:
‡
Press FUNCTION, 4, 5 and
‡
Select the desired mode (WITH or WITHOUT call screening).
‡
Press to confirm.
, select SIMPLE OGM then press
.
.
13