Turning On The Power - SATO CG2 Series Quick Manual

Turning On the Power

Power Setting
Plug the DC power cord of the AC adapter into the printer and turn on the
power.
1
Connect the AC power cord to the AC
adapter.
2
Connect the printer
AC power outlet. When plugging the
DC power cord into the printer's power
connector, make sure the DC power
cord connector is oriented properly.
When plugging in the DC power cord
to the printer, use one hand to hold the
printer while using the other hand to
plug in the cord.
26
CG208i̲E̲02.indd 26 CG208i̲E̲02.indd 26
AC adapter AC adapter
AC power cord AC power cord
AC adapter
DC input power terminal DC input power terminal
(Power connector) (Power connector)
Make sure the flat side Make sure the flat side
of the DC power cord is of the DC power cord is
facing up. facing up.
Plug Plug
DC power cord DC power cord
2008/05/21 10:56:40 2008/05/21 10:56:40