Table of Contents
Advertisement
V01C3SY
TRAXTER MAX SERIES
1. Oil drain plug
Allow enough time for oil to flow out
of oil filter.
Quest MAX Series
Remove the RH side panel then the
door in the footrest.
1
V04L1KY
1. Side panel
2. Footrest door
Unscrew the oil filter cover.
Remove the oil filter and replace with
a new filter.
NOTE: Check the cover O-ring and
change it if necessary.
Wipe out any oil spillage on engine.
Remove skid plate.
Remove oil strainer cover and oil col-
lector, located near drain plug, then
clean oil strainer.
1
2
V04C09Y
1. Oil strainer cover
2. Oil plug
Traxter MAX Series
Carefully unscrew oil filter and as soon
as it can be removed from the engine,
turn it upright. Discard filter.
NOTE: Be sure that the old filter O-ring
is removed.
CAUTION: Only use Bombardier high
pressure filter or suitable equivalent.
The Bombardier filter is specifically
designed for this engine. This filter
does not operate at the same pres-
sure as other brands. Using a non-
recommended filter may cause seri-
ous engine/transmission damage. See
an authorized Bombardier ATV dealer.
Lubricate the O-ring on the filter with
engine oil. Install the new filter then
screw one full turn after O-ring contact.
Wipe out any oil spillage on engine.
Remove skid plate.
2
1
127
Hide quick links:
Advertisement
Table of Contents
