Indicator Lights Cluster - BOMBARDIER Quest Max 2004 Operator's Manual

However, if the vehicle is used in se-
vere conditions, it is highly recom-
mended to use the manual mode
(use the gear shift button).
Start/Stop Switch
Located on top of the multi-function
switch. Dual function switch.
V01I07Z
1. Start/stop switch
To start engine, press and hold the
switch. Release immediately after en-
gine is started.
To stop engine, fully release throttle le-
ver then press the switch. It is not nec-
essary to hold the switch.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by press-
ing the start/stop switch.
Headlamp Dimmer Switch
Located under the electric gear shift
button. Toggle type switch. It allows
selection of headlamp intensity.
92
1
V01I070
1. Headlamp dimmer switch

7) Indicator Lights Cluster

Quest MAX and Traxter MAX Series
NOTE: When first turning switch to
ON (either position), all indicator lights
will turn on for a brief moment. This val-
idates their operation. Thereafter, only
the lights that are activated will remain
on: P, R or N for the Quest MAX series
and R, N, AUTO, high intensity and
gear position for the Traxter MAX se-
ries.
NOTE: Oil pressure light (Quest MAX
series) and temperature light (Traxter
MAX series) stay on until the engine
runs.
On Traxter MAX series, if all lights
flash, it indicates a particular malfunc-
tion of the transmission or the electrical
system. See an authorized Bombardier
ATV dealer as soon as possible.
Traxter MAX Series
Gear Position Display
Located on left side of cluster. It lights
up to indicate the gear position when-
ever the ignition switch is turned on
when the transmission lever is NOT in
PARK or in NEUTRAL position (wheth-
er or not engine is running).
1