Front/Rear Cargo Racks; Air Duct; Trailer Hitch; Radiator Cap - BOMBARDIER Quest Max 2004 Operator's Manual

Traxter MAX Series
Place seat to allow the insertion of the
U-shaped bracket over the rollers. Gen-
tly slide the brackets over rollers then
lower seat. When seat rests in its posi-
tion, firmly push seat down to latch.
V01A46Y
1. U-shaped bracket
2. Rollers
21) Front/Rear Cargo
Racks
Quest MAX and Traxter MAX Series
Located on top of chassis at front and
rear. Convenient racks to carry gear.
WARNING
Ensure to properly secure materi-
al to rack. Do not overload. En-
sure load does not interfere with
visibility and/or steering. Do not
carry passenger(s).
Refer to SPECIFICATIONS for carrying
loads and cargo weight distribution
recommendations.

22) Air Duct

Quest MAX and Traxter MAX Series
Located on rear fenders. They force
the flow of air to cool radiator and sup-
ply air inside air box.
CAUTION: Do not place anything over
air intake ducts.
102
2 1 2

23) Trailer Hitch

Quest MAX and Traxter MAX Series
Located on rear axle. Convenient hitch
to install a ball to tow a trailer or other
equipment. Install the proper ball size
as per trailer manufacturer recommen-
dations. Refer to SPECIFICATIONS for
carrying loads and towing recommen-
dations.
V00L01Y
TYPICAL
1. Trailer hitch
WARNING
Be sure to install the proper ball
size that matches the equipment
you will tow.
Follow manufacturer's instructions for
proper attachment.

24) Radiator Cap

Quest MAX and Traxter MAX Series
Located at rear of rear panel. It pro-
vides access to the radiator filling neck.
Pull the protector cap to give access to
the radiator cap. When finished, prop-
erly reinstall radiator cap then protec-
tor cap.
WARNING
To prevent burning yourself do
not remove the radiator cap if the
engine is hot.
1