Running Print Tests; Test Print - Pitney Bowes DM160i Operator's Manual

7 • Maintenance

Running Print Tests

The system has several tests that let you check print performance
and help you determine printing problems:

Test Print

The test print allows you to print a test pattern to see if the printhead
is functioning properly and has no blocked printing jets.
Always ensure that your prints are clear and complete. Poor prints
may be rejected by your Postal Authority. If you notice missing lines
in the print, perform a purge as described on the following page.
1. Press Options.
2. Press Page Down twice.
3. Select "Advanced Features".
4. Select "Maintenance mode".
5. Select "Printer maintenance".
6. Select "Test Print".
7. When prompted, insert an envelope through the machine.
8. You are asked if the test pattern is OK.
A. If yes, press Yes and you return to the PM Maintenance
menu.
Good test print - no missing lines
B. If no, press No and the system executes a purge. This may
take a few moments. When finished, you return to the PM
Maintenance menu.
Poor test print
9. Press Clear (back arrow key) 4 times to return to the Home
screen.
7-10
Good Test Print
(No Missing Lines)
Poor Test Print
(Missing Lines)
SDC974A