Pitney Bowes DM160i Operator's Manual page 76

7 • Maintenance
Fitting the Moistener (if supplied)
Slide the moistener onto the machine. You should hear a click as it
engages.
Filling the Moistener (if fitted)
Refer to the following procedure to refill the moistener.
1. Check the moistener tank to see how much sealing solution is
left.
2. Add enough sealing solution or water to bring the sealant level
up to the bottom of the fill hole. We recommend sealing solution
because it helps keep your moistener clean and improves
sealing efficiency.
3. If the tank was empty, allow 30 minutes for the moistener
brush and wick to get completely wet.
CAUTION! Don't overfill the moistener tank.
7-6
Check Level Here
Fill Here
SDC974A