Pitney Bowes DM160i Operator's Manual page 60

6 • System Options
Setting/Disabling the Supervisor Password
The supervisor password prevents unauthorised access to the
account setup procedures.
1. Press Options.
2. Press Page Down twice.
3. Select "LockCode/Passwords".
4. Select "Supervisor Password". Enter a 4-digit code, this
becomes your supervisor password. You are asked to confirm
the code. If there is an existing supervisor password, you are
prompted to key in the existing 4-digit code and then confirm the
code.
5. You can then press Continue to return to the Options menu.
To either disable or change the lock code.
1. Select "Supervisor Password".
2. Select "Change Supervisor Password".
3. Key in the existing Supervisor Password.
A. To permanently disable the Supervisor Password, select
"Disable Password".
B. To change the Supervisor Password, select "Change
Password".
At the prompt, type in a new Supervisor Password (4 digits)
and select "Continue".
Re-enter the new supervisor password again to confirm and
select "Continue".
3. Select "Continue" to return to the Options menu.
6-10 SDC974A