Pitney Bowes DM160i Operator's Manual page 67

Distributor Values
This option allows you to modify the phone connection parameters
that your machine uses to call to the Data Centre. A brief description
of each parameter is provided on the next page.
CAUTION: Do not change these parameters
unless directed to do so by a representative of
your machine supplier.
To access the Distributor Values:
1. Press Options.
2. Press Page Down twice.
3. Select "Connect-Data Centre".
4. Select "Distributor Values".
5. Select the parameter you want to modify from the list appearing
in the display. Use Page Down if needed to access your choice.
6. A warning message displays that reminds you that entering a
wrong value may result in errors connecting to the Data Centre.
If you want to continue, press Yes/Enter; otherwise, press No to
return to the Select to View/Edit menu.
7. Key in a new entry for that parameter (some entries may require
alpha-numeric characters). When finished, either select "Restore
Default" (if you made a mistake or changed your mind) or "Set
the new value" (if you are satisfied with your new entry).
8. If you have changed a parameter, a message confirming the new
setting displays. If you selected "Restore Default", a message
informing you that the parameter has been set to the original
Factory setting displays. In either case, select "Continue" to
return to the Select to View/Edit menu.
9. Press Clear (back arrow key) to return to Options menu.
SDC974A
6 • System Options
6-17