Pitney Bowes DM160i Operator's Manual page 73

Replacing the Ink Cartridge/Printhead (continued)
3. Flip open the ink cartridge guard.
4. Lift up and remove old ink cartridge.
NOTE: If you are NOT changing the printhead, skip to
Step 5. If you have been directed by a representative of
your machine supplier to change the Print Head, continue
with step 4A below.
4A. Squeeze the two grey tabs on either
side of the printhead.
4B. While squeezing, lift and tilt to the
right the printhead. The printhead
should come up out of the machine.
SDC974A
7 • Maintenance
Ink Cartridge
Guard
7-3