6.22 Front air conduit
Remove the frontal piece.
Loosen the 13 screws securing the front air
conduit to the crossbars, to the tank support
and to the appliance base.
Raise the two crossbars slightly so as to remove
them.
Tilt the entire air conduit forward and lift it off.
6.23 Front air seal
Once the front air conduit has been removed, the
air seal can be removed.
Raise the air seal to remove it completely.
When repositioning the front air seal, make sure
the joint is positioned as shown in the figure.
Technical Support - A.D.L.
46/66
599 74 32-54 Rev.01